--- APV 2800 - LB ---

APV-1
APV-2

System Management

See the status of a unit
-In the GUI
-High Availability
-HA General Settings
-General Information TAB

Add A New Server Set To Balance
-Identify the servers that are to be balanced.
-The application that will be running on the servers.
-The port that will be used by the application.
-The Virtual host-name that will be used and the IP

SERVER(s)
PORT
Service Type
IP (ssb|ssb-dev|?)

use: <server name>-<port>
     <ssb>-<port>
     <ssb-dev>-<port>
     

Real Service - enter server info
             - port
             - HTTP/TCP
             - IP

Virtual Server - FQDM
               - Port
               - HTTPS/TCP
               - IP
               
SLB - Real Service
        - Virtual Service HTTPS
          Name-port number used
          
          Policy Settings   - Likely needs a new group
                              name-port-number used
          Persestiant IP (RR)
          Domain                                       

Thanks to Sarah N.
APV1: 172.22.8.134:8888
APV2: 172.22.8.135:8888

Configuration notes for Array Networks 

For Real Services
**Create the Backend Server;

Go to - SLB > Real Services 
Click +ADD
type: HTTP
Real Service IP or Domain Name:banappt5.cc.binghamton.edu
Real Service Port: 8076
Health Check: TCP

**It has to check back 3 times for the red X to turn to a green check mark - Use the PING tool located under "Admin Tools>Troubleshooting"

**DNS config;

Go To - Network>DNS
Click +ADD
IPv4: 8.8.8.8 and 128.226.1.19

*Make sure everything allowed through 172.

**Static Route;
Routing> Basic Routing
Click +ADD - New Static Route

**Create a Group to add Real Services to

Go to - SLB > Real Services and click on the New SLB Real Services Group

Group Name: ssb-dev-8076
Method: Persistant IP
Number Activated: 0
Enable Group
Hash Bits: 32
First Choice Method: Round Robin
Flush Persistent Table

Click on the group name and you will be able to +ADD services to it

**Create a Virtual Service to associate to Group

Go to SLB>Virtual Services and click the New HTTPS Virtual Service tab

IP: 128.226.136.31
Port: 8076

**Create Policy

Go To SLB>Policies and policy settings